Over time your concrete floor will need some Ottawa concrete repair work. Fortunately, that doesn’t happen very often because of its durability and versatility. Over time any substance will degrade. However, preventive maintenance can help slow the wear and fix any damage before it becomes too great to handle with concrete flooring. Using routine inspections and working with a concrete contractor, you can develop the correct solutions to preserve the flooring for many years.

6 common concrete problems

Cracks 

Catching the crack in its early stages is the best way to handle this issue. If it progresses to the subgrade, you will need to replace the entire floor. Small cracks are fixed by removing loose material, inserting a concrete filler, and covering them with a sealant product.

Crazing 

A network of tiny cracks is called crazing. If the original concrete was not mixed properly or the curing was inadequate, you will develop this issue. The cracks are fairly superficial and will not affect the floor’s structure. However, they can become unsightly. It may be possible to apply an epoxy coating to cover the cracks. The best option is to apply a full layer of concrete.

Discoloration 

This can occur if the installation was faulty but more likely from spills like automotive fluids or cleaning chemicals. You can usually use a diluted vinegar solution and a stiff scrub brush. Severe stains can be professionally treated with chemicals, but leave that to the specialists.

Scaling 

The use of de-icing salt during the winter will cause outdoor surfaces to scale. The loss of surface concrete will continue until the damaged areas are repaired. The use of a new layer of concrete will fix the problem. The use of a waterproof finishing treatment will help in the future.

Buckling 

Large trees may extend their roots to open-air concrete pieces. Combine that with freeze-thaw cycles through the winter, and you will find the concrete buckling. The only solution is to remove the original concrete and install a patch or a new walk or drive.

Curling 

The concrete will start to curl with a difference in temperature and moisture from the top and bottom surfaces. Using concrete joints and low water content cement or water-reducing mixtures, the contractor will give the concrete the best chance to bond. The use of reinforcing rods in the slab also helps. Using an absorptive sub-grade will finish the repair.

Find a reliable Ottawa concrete repair company.

If your notice one of these common concrete problems in your home, contact Concrete Fusion. We are a reliable Ottawa concrete repair company that can help you with any of your needs. We have the experience and knowledge to get the job done right. Contact us today for a free consultation!